Home > Products > Fine Screen Machine > Tumbler Screen Sieve > Tumbler Screen Sieve For Citric Acid

Tumbler Screen Sieve For Citric Acid

A swinging screen is an efficient sieving machine that is designed to meet the large output, high-density sieving of the manufacturer. The simplest sieving is using your hands with the staring of your eyes. Tumbler screen machine is the mechanical simulation for this, it is the most effective principle which takes the most effective simulation of the artificial sieving movement (sieving precision, efficiency, sieve life is 5-10 times than usual cylinder sieve), in line with all the fine and ultra-fine powder and particulate materials, particularly suitable for materials which are difficult to deal with.

Send Inquiry Chat Now

We are the first manufacturer of Swinging Screen machine in China, more than 600 sets successful experiences, welcome to visit our company at any time, if you need more photos and other information, please contact with us. thanks!

Features:

Up to 5 times output per unit area; accurate to 6 level separation, sieving efficiency is as high as 90%-95%; when using the silicone rubber balls, ultrasonic, and another high-performance mesh-cleaning device system, the sieve hole will not be blocked. Confined cleaning dust, safe operation; the acceleration is 4.5 times lower than a vibrating sieve, sieving parts’ increase the life expectancy and reduces maintenance; noise <75 dB. Re-optimization is balanced, the ground-based dynamic load is low.

Structure Principle:

— Basic rotary motion is similar to artificial sieving. Eccentricity is adjustable from 25 to 40mm, low-speed V-belt drive is adjustable from 120 to 360rpm.
— Each product’s dwell time can be adjusted by the radial of the Tumbler screen and the angle towards the direction of the drive axis.
— The process is repeated in each sieve layer.
— The horizontal and vertical acceleration is increased with the movement of the particles, and then the particles which are close to sieve size will be successfully separated; The larger particles are transported to? the exit, the flow can be controlled by the regulated oriented device at the exit, the oriented device is another factor that controls the dwell time of the material.
— Therefore, establishing the horizontal and throwing three-dimensional rolling movement, materials are evenly dispersed on the entire sieve surface from the center to the outer edge, and thus spread towards the axis by spiral movement. Small particles are then finished in the whole sieving process.

Technical Parameters:

Model(SC) SC-600 SC-1000 SC-1200 SC-1600 SC-2000 SC-2400 SC-2600
Diameter 600 1000 1200 1600 2000 2400 2600
Surface area 0.29 0.71 1.11 2.62 2.62 3.63 5.31
Height 0.4 1.2 1.6 2.5 3.6 5.2 6.8
Layer 5 5 5 5 5 5 5
Power 0.25 1.5 2.2 2.2/4 2.2/4 5.5 5.5
working diameter 630 930 1100 1340 1340 1740 1940
1layer height(MM) 830 1155 1480 1480 1500 1470 1580
1ayer weight(Kg) 140 490 700 980 1050 1690 1900
2layer height(MM) 965 1280 1640 1640 1660 1590 1710
2ayer weight(Kg) 155 535 770 1060 1140 1780 2000
3layer height(MM) 1080 1400 1800 1800 1820 1710 1840
3ayer weight(Kg) 170 580 840 1140 1230 1870 2100
4layer height(MM) 1200 1525 1960 1960 1980 1830 1970
4ayer weight(Kg) 185 625 910 1220 1320 1960 2200
5 layer height(MM) 1310 1650 2120 2120 2140 1950 2100
5 layer weight(Kg) 200 670 980 1300 1410 2050 2300
Hot Products